|
|
|
 |
|
|
|
|
|
|
|
FENDER Pédale volume vintage
|
EN STOCK
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
FENDER PEDALE VOLUME
Caractéristiques:
Input Impedance: 250kOhm
Output Impedance: 0 to 62kOhm, (Varies with Pedal Position)
Pedal Control: For Volume Control�Tilt the Pedal Back and Forth.
� Tuner Output�Connect to your tuner, if desired. The Volume pedal does
NOT affect this output!
� Input jack�Plug your guitar (or other audio source) in here.
� Output jack�Connect to the input of your amplifier (or other audio device).
[0234500001]
Détails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FENDER Pédale volume tone vintage
|
EN STOCK
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
FENDER PEDALE VOLUME-TONE
Caractéristiques;
Pedal Controls:
Volume Control�Tilt the Pedal Back and Forth.
Tone Control�Rotare the Pedal Left and Right.
Note: This pedal uses a passive Tone control circuit and works best when
connected directly to a passive guitar. If you must use an active guitar or
put other pedal before this one, the output impedance of the active
device should be 10kOhm minimum for the best performance.
� Tuner Output�Connect to your tuner, if desired. The Volume Control does
NOT affect this output, but the Tone Control DOES affect it.
� Input jack�Plug your guitar (or other audio source) in here.
� Output jack�Connect to the input of your amplifier (or other audio device).
[0234500002]
Détails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FENDER Pédale FUZZ-WAH vintage
|
EN STOCK
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
FENDER PEDALE FUZZ-WAH
Caractéristiques;
Pedal Controls:
� Wah Control�Tilt the pedal back and forth.
� Fuzz Control�Rotate the pedal left and right.
Bottom Panel:
� Effects Order�Switches the order of the effects in the signal path to
provide two distinct sounds. Experiment!
� Fuzz Volume�Adjusts the volume level of the Fuzz effect so that you can
match the volume level of your guitar when Fuzz is turned off. Also try
setting it for a Fuzz effect volume boost!
Features:
� Fuzz Switch�Turns the Fuzz effect on-off.
� Wah�Turns the Wah effect on-off.
� Input Jack�Plug your guitar (or other audio source) in here. Un-plug the
input plug from this jack to turn off the device and save power (very
important) when not in use.
[0234500003]
Détails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FENDER Pédale PHASER vintage
|
EN STOCK
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
FENDER PEDALE PHASER
Caractéristiques;
� Rate�This knob controls the rate at which the phase shifting occurs. The
rate control knob alternately illuminates blue and red at the same rate as
the phase shifting.
� IntensiIty�This knob adjusts the intensity of the Phasing effect.
� Frequency�This knob adjusts what frequencies are affected by the
phasing action. Fully counter-clockwise causes the bass frequencies to
be affected most by the phasing action, fully clockwise causes the treble
frequencies to be most affected by the phasing action.
� Bypass SwiItch�A �true-bypass� of the phaser effect. Turns the phasing
effect on-off.
� Output Jack�Connect to the input of your amplifier (or other audio
device).
[0234500004]
Détails
|
|
|
|
|
|
|
|
|
|
|
|
